KSIM Series Single Phase AC Output SSR
KSIM Series Single Phase AC Output SSR. KSIM series is mini size panel mount AC output solid state relays with quick connect terminals or screw mount options. This series is available with ratings from 10 to 25 Amps at 24 to 440 VAC. This series is UL and TUV certified and CE compliant. It is ideallyfor applications with limited space, which is widely used for heating control, such as coffee machine.
Model:KSIM
Send Inquiry
Product Description
· Zero-crossing or Random-on Switching
· TRIAC Output
· DC Input
· Dielectric Strength: 4000Vrms
· Load Current: 10A, 16A, 25A
· Internal RC/MOV, TVS Protection Circuit
· LED Indicator
· RoHS Compliant
· TRIAC Output
· DC Input
· Dielectric Strength: 4000Vrms
· Load Current: 10A, 16A, 25A
· Internal RC/MOV, TVS Protection Circuit
· LED Indicator
· RoHS Compliant
General parameters
| Name | KSIM Series SSR |
| Load Voltage | 240VAC / 380VAC |
| Load Current | 20A / 16A / 25A |
| Ambient Temperature Range | -30℃ ～ +80℃ |
| Storage Temperature Range | -30℃ ～ +100℃ |
| Weight (Typical) | 35g |
Click the link below to download datasheet
KSIM SERIES SINGLE PHASE AC OUTPUT SSR.pdf
General Notes
1. Relay must be mounted to proper sized beat sink hased on thermal curves. Thermal grease or a thermal pad must be used between relay and heat sink and be torqued down to 18-20/2.0-2.2in-lb/Nm.
2. When connection wiring to SSR, please ensure screws are torqued down properly (input 13-15/1.5-1.7in/lb/Nm, output13-15/1.5-1.7in-lb/Nm).
3. SSR's carrying load capacity is related to the operation ambient temperature and heat dissipation condition, please refer to the Thermal Derating Curve for derating.
4. The capacitive load will generate high inrush current at the moment when the SSR been turned on, which may damage the SSR. Therefore, if the load type is capacitive, or if the load has parallel capacitance, please make sure series connect a NTC in the load loop to suppress the inrush current to protect the SSR.
◆Product specifications are subject to change without notice. Please don’t hesitate to contact with us for any technical questions.
2. When connection wiring to SSR, please ensure screws are torqued down properly (input 13-15/1.5-1.7in/lb/Nm, output13-15/1.5-1.7in-lb/Nm).
3. SSR's carrying load capacity is related to the operation ambient temperature and heat dissipation condition, please refer to the Thermal Derating Curve for derating.
4. The capacitive load will generate high inrush current at the moment when the SSR been turned on, which may damage the SSR. Therefore, if the load type is capacitive, or if the load has parallel capacitance, please make sure series connect a NTC in the load loop to suppress the inrush current to protect the SSR.
◆Product specifications are subject to change without notice. Please don’t hesitate to contact with us for any technical questions.
Hot Tags: KSIM Series Single Phase AC Output SSR, China, Manufacturers, Suppliers, Factory, Quality
Related Category
Single Phase AC Output
Single Phase DC Output
Dual Phase AC Output
Dual Phase DC Output
Three Phase AC Output
Send Inquiry
Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.
