Home > Products > Din-rail Mount SSR > Single Phase DC Output SSR > KSOD Series Single Phase DC Output
KSOD Series Single Phase DC Output
KSOD Series Single Phase DC Output. KSOD series is a plug-in solid state relay, which is designed to be pluggable into industry standard relay sockets to replace plug-in electromechanical relays. They are available with ratings from 2 to 16 Amps at 1 to 400 VDC.
Model:KSOD
Send Inquiry
Product Description
· MOSFET Output or Transistor Output
· Control Voltage: 4-32VDC
· Load Voltage: 50VDC、100VDC、200VDC、400VDC
· Load Current: 2A、3A、5A
· Dielectric Strength: 2500Vrms
· RoHS Compliant
· Plug in installation
· Optional base mounting
· Photoelectric isolation
· Control Voltage: 4-32VDC
· Load Voltage: 50VDC、100VDC、200VDC、400VDC
· Load Current: 2A、3A、5A
· Dielectric Strength: 2500Vrms
· RoHS Compliant
· Plug in installation
· Optional base mounting
· Photoelectric isolation
General parameters
| Name | KSOD Series SSR |
| Load Voltage | 50VDC~400VDC |
| Load Current |
2A/3A/5A |
| Ambient Temperature Range | -30℃ ～ +80℃ |
| Storage Temperature Range | -30℃ ～ +100℃ |
| Weight (Typical) | 20g/50g |
Click the link below to download datasheet
KSOD SERIES SINGLE PHASE DC OUTPUT.pdf
General Notes
1.Control end polarity should be correct, otherwise it will damage the product.
2. When the working environment temperature of the product is high, please refer to the temperature curve for derating.
3.The capacitive load will generate extremely high surge current at the moment of conduction, which may cause the damage of solid state relay due to excessive surge current. Therefore, if the load is capacitive load, or if the load has a conjoint unga capacitor, it is strongly recommended that the NTC in series in the load loop should be used to suppress the surge current, so as not to damage the product.
4. Special attention should be paid to electrostatic protection during use.
◆Product specifications are subject to change without notice. Please don’t hesitate to contact with us for any technical questions.
2. When the working environment temperature of the product is high, please refer to the temperature curve for derating.
3.The capacitive load will generate extremely high surge current at the moment of conduction, which may cause the damage of solid state relay due to excessive surge current. Therefore, if the load is capacitive load, or if the load has a conjoint unga capacitor, it is strongly recommended that the NTC in series in the load loop should be used to suppress the surge current, so as not to damage the product.
4. Special attention should be paid to electrostatic protection during use.
◆Product specifications are subject to change without notice. Please don’t hesitate to contact with us for any technical questions.
Hot Tags: KSOD Series Single Phase DC Output, China, Manufacturers, Suppliers, Factory, Quality
Related Category
Send Inquiry
Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.
