KSQC Series Three Phase AC Output SSR
KSQC Series Three Phase AC Output SSR. KSQC series is a three phase AC output solid state relay. The load voltages are rated from 200 to 660 VAC, and the load currents are rated from 25 to 80 Amp. This product is suitable for temperature control system, such as large commercial oven. It is available with the phase lost, overtemperature and failure alarm functions.
Model:KSQC
Send Inquiry
Product Description
· Zero Crossing or Random-on
· Load Current: 25-80A
· Over-temperature Protection
· Phase-loss Detection Function
· Fault Indication Function
· SCR Failure Detection Function
· Load Disconnection Detection Function
· Alarm Contact Output (Optional)
· Internal RC/MOV Protection Circuit
· RoHS Compliant
· Load Current: 25-80A
· Over-temperature Protection
· Phase-loss Detection Function
· Fault Indication Function
· SCR Failure Detection Function
· Load Disconnection Detection Function
· Alarm Contact Output (Optional)
· Internal RC/MOV Protection Circuit
· RoHS Compliant
General parameters
| Name | KSU Series SSR |
| Load Voltage | 200-480VAC / 200-600VAC |
| Load Current | 25A / 40A / 60A / 80A |
| Ambient Temperature Range | -30℃ ～ +80℃ |
| Storage Temperature Range | -30℃ ～ +100℃ |
| Weight (Typical) | 290g |
Click the link below to download datasheet
KSQC SERIES THREE PHASE AC OUTPUT SSR.pdf
General Notes
1. Relay must be mounted to proper sized beat sink hased on thermal curves. Thermal grease or a thermal pad must be used between relay and heat sink and be torqued down to 18-20/2.0-2.2in-lb/Nm.
2. When connection wiring to SSR, please ensure screws are torqued down properly (input 13-15/1.5-1.7in/lb/Nm, output18-20/2.0-2.2 in-lb/Nm).
3. SSR's carrying load capacity is related to the operation ambient temperature and heat dissipation condition, please refer to the Thermal Derating Curve for derating.
◆Product specifications are subject to change without notice. Please don’t hesitate to contact with us for any technical questions.
2. When connection wiring to SSR, please ensure screws are torqued down properly (input 13-15/1.5-1.7in/lb/Nm, output18-20/2.0-2.2 in-lb/Nm).
3. SSR's carrying load capacity is related to the operation ambient temperature and heat dissipation condition, please refer to the Thermal Derating Curve for derating.
◆Product specifications are subject to change without notice. Please don’t hesitate to contact with us for any technical questions.
Hot Tags: KSQC Series Three Phase AC Output SSR, China, Manufacturers, Suppliers, Factory, Quality
Related Category
Single Phase AC Output
Single Phase DC Output
Dual Phase AC Output
Dual Phase DC Output
Three Phase AC Output
Send Inquiry
Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.
